Royal Sovereign 1050 - Manual (Page 25)

4. It may stay at STAND-BY mode. press the STND-BY button
*Hot roller is not heater 1. It is set at the cold mode 1. Change the function to hot
up. 2. Memorized temp may be lower lamination.
than atmosphere temp. 2. Set proper temperature for the
work
*Wrinkled lamination 1. Film tension is not proper, too 1. Adjust film tension.
result tight.
*Result of lamination is 1. Temperature on the hot roller 1. Increase the temperature on the
not clear is too low or lamination is too hot roller or decrease the
speedy. speed.
1. For six month from the date of purchase, Royal Sovereign International Corporation
or its authorized service center will repair this product free of charge if it is defective
in material or workmanship.
2. This Limited Warranty does not include cleaning, or damage caused by accident,
neglect, misuse or improper installation, operation or external scratch, any damage
caused from service, maintenance, modifications or tampering by anyone other than
4
1
EA MODEL
FUSE(65TS)
(AC250V 20A)
6
1
1
Core(76mm)
FUSE(50T)
(AC250V 6.3A)
Bolt(M8X65)
Washer(Φ8)
Nut(M8)
L-Wrench
8
8
PART NAME EA MODEL PART NAME
SPARE PARTS
WARRANTY
RSH-1650
RSH-1050
RSR-1050
RSR-685
RSH-1650
RSH-1050
RSR-1050
RSR-685
- 25 -