Renesas SuperH HS7710KCM02HE - Manual (Page 8)

2
Table 1.1 Components of the Emulator (HS7710KCM01H, HS7710KCM02H,
HS7710KCI01H, or HS7710KCI02H) (cont)
Classi-
fication
Component
Appearance Quan-
tity
Remarks
Hard-
ware Ferrite core
(connected with the
user interface cable) 1 Countermeasure for EMI*
(only for HS7710KCM02H and
HS7710KCI02H)
Soft-
ware SH7710 E10A
emulator setup
program,
SuperH
TM Family
E10A Emulator User’s
Manual, and
Specific Guide for the
SH7710 E10A
Emulator
1 HS7710KCM01SR,
HS0005KCM01HJ,
HS0005KCM01HE,
HS7710KCM02HJ, and
HS7710KCM02HE
(provided on a CD-R)
Note: The EMI is an abbreviation of the Electrical Magnetic Interference.
For EMI countermeasure, use the ferrite core by connecting the user interface cable.
When the user interface cable is connected with the emulator or user system, connect the ferrite
core in the user system as shown in figure 1.1.
User interface cable
Host computer (PC with PC card slot)
E10A emulator
PC card slot
Insert PC Card Emulator
H-UDI Micro Computer Development System
HITACHI PC Card
User system
User system connector
Ferrite core
Figure 1.1 Connecting Ferrite Core