Rena DA615 - Manual (Page 76)

Annex C - Glossary
\text\etd\DA615\glossary C.3 Annex DA615
Printer driver:
The driver converts the printer commands
entered via software into instruction codes for
the printer. It must be adapted to both the
software and the printer.
Print-head cradle:
The print head is attached to a movable cradle.
Print-head holder:
This holds the print head securely in place.
Print-head spacing:
This affects the print quality. If the spacing is
too big, the print is unclear. If it is too small, the
ink can smudge.
Sans Serif font:
A font type with no horizontal lines on the head
or foot of a letter. This text is printed in a Sans
Serif font, for instance.
Separators:
Separators allow single-sheet feed from a
media stack. The lowest sheet is drawn in first.
Serial interface:
In a serial interface, the data are transferred
successively (bit by bit) from the computer to
the printer. The connection is set up via an RS-
232-C socket.
Serif font:
Serifs are the „feet“ on the Antiqua fonts. Cour
is a serif font, for example.
Setting:
Selecting configurations.
Soft fonts:
Soft or download fonts are stored on floppy
disk. They can be loaded into the printer mem-
ory.
Software:
The various programs installed in your com-
puter system, including operating and graphics
programs or special application packages.