Rena DA615 - Manual (Page 33)

Printer functions
\text\etd\DA615\printerf 5.4 DA615 instruction manual
MENU OPTION
SPECIAL FUNCT.
BIT8 SET TO BIT8 FIX0 FIX1
AUTO LF off on_1 on_2 on_3
HEX TO ASCII off on
LINE MODE off 0 1 ... 99
DELIMITER < > off on
STX-ETX off on
OFFS. EDGE [
mm
] 0 ... 304 [mm]
WARMING off lev1 lev2 lev3 lev4 max
PAPER TIME-OUT on off
SPEED REDUCT. off 5% 10% 15% 20%
SERIAL INTERF. PC DISP
HANDSHAKE DTR both XON
BAUDRATE 9600 4800 19K2
DATA LENGTH 8Bit 7Bit
PARITY no even odd
STOPBIT 1 2
SERVICE Rev. Adrc Head Char HexD InpD SetD
HARDWARE TEST -- For service use only ! --
HEAD RESET all Hd.1 Hd.2 Hd.3 Hd.4 no
The underlined values are default settings
Explaining the menu fields
Setting Selection of user configurations.
If you wish to use the DA615 in certain applications, it may be necessary
to change some menu settings. You may set up various configurations
yourself and store them in the "Setting" menu.
Nine of the 10 options, namely "No 1" - "No 9", are available for your
own configuration.
The first option, "No 0", is reserved for the default setting.
If you select this option, programming mode is terminated immediately
after you press the "ENTER" key. No further changes can then be made
in this configuration.
To make changes in your configuration, you must first select one of the
remaining nine options ("No 1" to "No 9").
When programming mode is terminated, the changes made are
automatically stored in the selected "Setting No".