Rena DA615 - Manual (Page 37)

Printer functions
\text\etd\DA615\printerf 5.8 DA615 instruction manual
Char. Spacing You can change the character spacing from 0 to 90 dots by inserting
additional blanks.
Char. Height You can increase the character height to up to six times the standard
height without changing the width.
Char. Width You can increase the character width to up to six times the standard
width without changing the height.
Line Spacing You can change the spacing between the lines from 1 to 10 lines per
inch.
Orientation The address block may be rotated by 180°.
In "Nor" mode, the address is printed in reverse.
In "Rev" mode, the address is printed in legible form.
Paper Size You may select any of the following format sizes:
Format Meaning P/E/ Size in inches Size in mm
Cd* Width x length ** Width x length **
off No format size -- -- --
EXEC Executive P 7 1/4 x 10 1/2 184 x 267
LETT Letter P 8 1/2 x 11 216 x 279
LEGA Legal P 8 1/2 x 14 216 x 356
A4 DIN A4 P 8 1/4 x 11 11/16 210 x 297
A5 DIN A5 P 5 13/16 x 8 1/4 148 x 210
MONA Monarch K 3 7/8 x 7 1/2 98 x 190,5
C10 Com-10 (Business) K 4 1/8 x 9 1/2 105 x 241
INTD International DL K 4 11/32 x 8 21/32 110 x 220
C5 International C5 K 6 3/8 x 9 1/64 162 x 229
INSD Inserter DL K 4 1/2 x 9 1/64 114 x 229
C6 International C6 K 4 1/2 x 6 3/8 114 x 162
A6 DIN A6 P 4 1/8 x 5 13/16 105 x 148
CRD1 Card 1 Kt 4 x 6 102 x 152
CRD2 Card 2 Kt 5 x 8 127 x 203
HAGA Hagaki K 3 15/16 x 5 13/16 100 x 148
B5 K 6 15/16 x 9 27/32 176 x 250
USER The format width
is entered in mm
P max. 30 max. 762
*
P = Paper / E = Envelope / Cd = Card
** The values printed in bold are the lengths in the direction of transport