23 22 resetting the counter to zero, Cassettes, Clock and counter display – RCA BLD-6HD1 User Manual

Page 13: Remaining time and cassette length, Finding the counter zero position

Resetting the counter to zero

Press MENU and choose ‘Tape Control’ by pressing PR+ and then
OK.
Choose ‘Counter Reset’ by pressing PR- twice and then OK.
The video will reset the counter to zero.

COUNTER RESET

0:00:00

This display will only appear when there is a cassette in the video.

Cassettes

Use only good-quality cassettes with the VHS logo.

• Keep cassettes away from moisture or dust, magnetic and

electrical fields (for example, loudspeakers and computer
monitors).

• Always rewind cassettes to the beginning when you have finished

using them. Stand cassettes up with the full spool at the bottom.
Always keep cassettes in their cases.

You can protect your precious recordings from being recorded over by
breaking off the safety tab on the side of the cassette (some
cassettes have a slide). When you have removed the tab your video
will eject the cassette if ever you try to record onto it.
If you want to record onto the cassette after removing the tab, cover
the hole with sticky tape.
We advise you to use a head - cleaning cassette every six months to
keep your video in perfect working order.

PAL

Clock and counter display

◆

The counter counts in real time from when you load the cassette. This does not have to be at the beginning

of the cassette. The counter does not count unrecorded parts of the cassette.

◆

If you rewind the cassette, the counter will count backwards, if you rewind beyond the zero position, the

counter counts in negative values for example, – 0:01:15.

This display will only appear when there is a cassette in the video.

STOP SP PR01 P-01

14:00 11/08

STEREO ON

Press

once to display the time and date.

Press

twice to display the counter time and how long is

left to the end of the cassette.

Press

three times to clear the screen.

Remaining time and cassette length

Choose ‘Tape Remain’ by pressing OK.
Press PR+ or PR- to select the length of your current cassette.
Press OK to confirm. The display will show how long is left to the
end of the cassette.
This will be displayed for several seconds only.

Finding the counter zero position

Press MENU and choose ‘Tape Control’ by
pressing PR+ and then OK.
Choose ‘Go to Zero’ by pressing PR- and
then OK.
The video will wind to the position 0:00:00
and stop.

REW SP
GO TO ZERO

0:02:13

TAPE CONTROL

TAPE REMAIN

E-240 01:27

TAPE REMAIN
GO TO ZERO
COUNTER RESET

E-180
E-240
E-300

PR+/-:SELECT
OK:CONFIRM MENU:END

TV/VCR

PROG

MENU

EJECT

PAL/SEC

A.SEL

SP/LP

INDEX

This display will only appear when there is a cassette in the video.

Press MENU and choose ‘Tape Control’ by pressing PR+ and then OK

This display will only appear when there is a cassette in the video.

These buttons are used
on the following three
pages.