beautypg.com

19 18 normal timer recording, Recording cassettes, One-touch recording-otr – RCA BLD-6HD1 User Manual

Page 11

background image

19

18

Normal timer recording

For timer recordings, clock, date, and stations must be set correctly.

Load a cassette with its safety tab in place (see page 23) and with enough free tape for the recording.

TV/VCR

PROG

PR

PR

MENU

EJECT

PAL/SEC

A.SEL

AV

SP/LP

INDEX

1

2

3

4

5

6

7

8

9

0

30

A

1

Press MENU.
Choose "Timer Program" by
pressing OK.

There are positions for eight timer
programs.
Press PR+ or PR- to select an
unused program, for example ‘- - - -’
then press OK to confirm.

Press PR+ or PR- to select how
often you want to make the
recording, for example, once, weekly
and so on. Press OK to confirm.

2

3

PR+/-:SELECT (AV)
0-9 :SETUP(PR)

/ :CORRECT MENU:END

PR

--

START TIME

--:--

END TIME

--:--

START DATE

--/--

TAPE SPEED

SP

TIMER PROGRAM (ONCE)

PR : Use PR+ if you want to choose

the AV channel or 0 to 9 for other
channels.

Start time : Use buttons 0 to 9 to

enter the start time.

End time : Use buttons 0 to 9 to enter

the end time.

Start date : Use buttons 0 to 9 to

enter the date.

Tape Speed : Use PR+ if you want to

choose LP (see page 17).

If you want to change any of the
details. Move to the details you
want to change using the and
buttons.
Change the setting using the PR+ or
PR- or number buttons 0 to 9.

These buttons are used
on the following two
pages.

HOW OFTEN DO YOU WANT

TO RECORD THIS PROGRAM?

PR+/-:SELECT
OK:CONFIRM MENU:END

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)

TIMER PROGRAM (ONCE)

PR

01

START TIME

18:10

END TIME

20:30

START DATE

15/08(FRI)

TAPE SPEED

LP

PR+/-:SELECT (AV)

0-9 : SETUP (PR)

/

:CORRECT

OK:CONFIRM MENU:END

Recording cassettes

If you want to use the video’s timer to record a programme, the clock, date and stations must be set

correctly.

Load a cassette with its safety tab in place (see page 23) and with enough free tape for the recording.

One-touch recording-OTR

VCR

Press PR+ or PR- to choose the station you want to record.

Every time you press , the recording time will increase by 30 minutes. It is
possible to record for up to 10 hours if there is enough room on the cassette.

To cancel OTR press and hold the STOP button for about five seconds until the video

stops recording.

• If you want to record from other equipment that is connected to your video, see page 5.