17 16 simple recording, Osd (on screen display) on & off – RCA BLD-6HD1 User Manual

Page 10

Simple recording

TV/VCR

PROG

MENU

EJECT

PAL/SEC

A.SEL

SP/LP

INDEX

Load a cassette with its safety tab in
place

(see page 23).

Press to start your recording.

Press if you want to stop the
recording for a short while.

Press to continue recording.

Press to stop your recording.

Press PR+ or PR- to choose the
station you want to record.
Press SP/LP if you wish to double
the length of the cassette’s recording
time.

For example, on an E-240 cassette you can
record for up to four hours when SP is
displayed, or up to eight hours when LP is
displayed.

STOP SP PR01 ARD

STEREO ON

VCR

These buttons are used
on the following two
pages.

VCR SETUP

CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF

PR+/-:SELECT
OK:CONFIRM MENU:END

OSD ON/OFF

ON
OFF

PR+/-:SELECT
OK:CONFIRM MENU:END

OSD (On Screen Display) ON & OFF

This VCR is set to “OSD (On Screen Display) ON” mode at the factory, but you can change it to OFF
mode. When a function is changed at the front display or remote control the change will be
displayed on the screen.

Press MENU.
Choose “VCR SETUP”
And press OK.

Choose “OSD ON/OFF”.

If you want OSD OFF mode, press PR- and press
OK.

OSD characters will not be displayed in the normal
picture at the start of each mode change.

MAIN MENU

TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL

PR+/-:SELECT
OK:CONFIRM MENU:END

Though the ”16:9 SET” is displayed on the screen, this function is not available for this set.