Radio Shack TAD 1130 - Manual (Page 21)

21 TAD Operation
To enter a remote command, press # and
(within 2 seconds) the number for the com-
mand you want.
Note: The remote operation stops when
someone picks up the handset or any phone
on the same phone line.
Remote Commands
Press #
then
To
1 Repeat the current message during
playback.
2 Play messages.
3 Skip the current message during play-
back.
4 Delete the current message during
playback.
5 Stop playback, recording, or room
monitoring.
6 Set the TAD to answer calls.
7 Record or stop recording a memo.
8 Record or stop recording a new out-
going message.
9 Set the TAD to not answer calls.
Monitor the room where the TAD is
located.
43-1130.fm Page 21 Tuesday, May 30, 2000 1:22 PM