beautypg.com

Telephone operation, Making and receiving calls with the handset, Adjusting the handset volume – Radio Shack TAD 1130 User Manual

Page 14: Selecting the channel, Answering calls with the speakerphone, Switching between the handset and speakerphone, Using both the handset and speakerphone

background image

14

Telephone Operation

ˆ

Telephone Operation

MAKING AND RECEIVING
CALLS WITH THE HANDSET

To make a call, lift the handset and press

TALK

. The TALK/LOW BATT indicator on the

handset and the CHARGE/IN USE indicator
on the base light. Dial the number.

To answer a call, lift the handset from the
base or, if the handset is away from base,
press any key to make or answer a call.

To end a call, place the handset on the base
or press

TALK

.

ADJUSTING THE HANDSET
VOLUME

To adjust the volume you hear through the
handset during a call, press

VOL

8

8

8

8

or

9#

9#

9#

9#

to

increase or to decrease the volume.

Note: If you press

VOL

8

8

8

8

or

9

9

9

9

while the

volume is set to the maximum or lowest lev-
el, the setting does not change and you hear
three quick beeps.

SELECTING THE CHANNEL

The phone scans 30 channels (frequency
pairs used between the base and the hand-
set) and automatically selects a clear chan-
nel each time you make or receive a call.

If you hear other conversations or excessive
noise during a call, press

CHANNEL

to select

a different channel.

Note: If the handset is too far from the base,
the channel might not change. Move closer
to the base and try again.

ANSWERING CALLS WITH
THE SPEAKERPHONE

To answer a call using the speakerphone,
press

SPEAKER

. The SPEAKER indicator

lights.

To adjust the speakerphone’s volume, re-
peatedly press

VOLUME

8

8

8

8

or

9

9

9

9

on the

base. The volume setting from

1

(lowest) to

10

(highest) appears in the message

counter window.

To end a speakerphone call, press

SPEAKER

again.

SWITCHING BETWEEN THE
HANDSET AND
SPEAKERPHONE

To switch to the speakerphone while you are
using the handset, press

SPEAKER

on the

base. When you hear the conversation on
the speakerphone, press

TALK

on the hand-

set.

To switch to the handset while you are using
the speakerphone, lift the handset off the
base. If the handset is away from the base,
press

TALK

, then press

SPEAKER

.

USING BOTH THE HANDSET
AND SPEAKERPHONE

If someone else is using the speakerphone,
press

TALK

on the handset to join the con-

versation. If someone else is using the hand-
set, press

SPEAKER

on the base to join the

conversation.

During the call, one person can hang up and
let the call continue at the other keypad. Or,
both people can hang up to end the call.

43-1130.fm Page 14 Tuesday, May 30, 2000 1:22 PM