beautypg.com

Tad operation, Selecting the outgoing message, Recording/deleting an outgoing message – Radio Shack TAD 1130 User Manual

Page 17: Setting the record time

background image

17

TAD Operation

Notes:

• Connecting a headset disconnects the

handset’s earpiece and microphone.

VOL

8

8

8

8

or

9

9

9

9

or

MUTE

on the handset

also controls the connected headset’s
volume.

• If you place the handset on the base to

recharge it while the headset is con-
nected, be sure the handset seats prop-
erly.

• With a headset connected, you can

make or answer calls as usual using the
keys on the handset. You can also
answer calls by pressing

SPEAKER

located on the base.

• You can use a handset holder (available

from your local RadioShack store) to
hang the handset on your belt for
greater convenience.

ˆ

TAD Operation

SELECTING THE OUTGOING
MESSAGE

The TAD has two prerecorded outgoing mes-
sages. One asks the caller to leave a mes-
sage: “Hello, no one is available to take your
call. Please leave a message after the tone.”
The TAD uses this message when

REC

TIME

is set to

1

or

4

(see “Setting the Record

Time”).

The other recording is an announcement and
does not let the caller leave a message: “Hel-
lo, no one is available to take your call.” The
TAD uses this message when

REC

TIME

is

set to

ANN

(announcement only).

You can also record your own message (see
“Recording/Deleting an Outgoing Message”).
When you record your own outgoing mes-
sage, the TAD uses it for all

REC

TIME

set-

tings.

To switch between your outgoing message
and the TAD’s prerecorded message, press

OGM

. When the current message begins to

play, press

OGM

again. The TAD switches to

the other message and plays it.

RECORDING/DELETING AN
OUTGOING MESSAGE

To record your outgoing message (up to 30
seconds long), hold down

OGM

until the TAD

beeps and

--

appears. When you finish

your message, press

PLAY/STOP

or

OGM

.

The TAD plays back your message.

To delete your outgoing message and use
the TAD’s prerecorded messages, hold
down

OGM

until the TAD beeps. Then press

OGM

again within two seconds.

SETTING THE RECORD
TIME

Set

REC TIME

to

1

,

4

, or

ANN

to determine

how the TAD will record incoming messages.

1

— The TAD plays the outgoing mes-

sage and lets callers leave a message
up to 1 minute long.

4 — The TAD plays the outgoing mes-
sage and lets callers leave a message
up to 4 minutes long.

43-1130.fm Page 17 Tuesday, May 30, 2000 1:22 PM