Runco VX-2c - Manual (Page 25)

24
MENU DESCRIPTION AND NAVIGATION
Color
Gamut
Color Space
Color Temp
Color Indicates you are in the Color Settings menu
Gamut Press ENTER to access the Gamut settings menu
Color Space Press ENTER to access the Color Space settings menu
Color Temp Press ENTER to access the Color Temperature setting menu
Service
Power Cycle
Standby Time
No. of Lamps Used
Service Indicates you are in the Service Information menu
Power Cycle Press Enter to return the number of Power Cycles the unit has
undergone
Standby time Press Enter to return the amount of Standby Time the unit has
undergone
No. of lamps used Press Enter to return the number of Lamp Changes the unit
has undergone
From the Advanced menu use the Up or Down arrow to select “Service” and press the Enter button to call up the
Service options.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
From the Advanced menu use the Up or Down arrow to select “Color” and press the Enter button to call up the
Color options.
There are three options:
Gamut: Manual, projector white balance calibration for D6500K
Color Space: Hi-Def, SD NTSC, SD PAL
Color Temp: 5000K, 6500K, 9300K
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
Reset to Default Reset to Default This display will Reset all of the projector settings back to the
original factory default.