Runco VX-2c - Manual (Page 23)

22
MENU DESCRIPTION AND NAVIGATION
Gamma
Red
Green
Blue
Gamma Indicates you are in the Gamma Setting Menu
Red Press ENTER to change the Red Gamma setting by using the
UP and DOWN arrows to Increase or Decrease the value
Green Press ENTER to change the Green Gamma setting by using
the UP and DOWN arrows to Increase or Decrease the value
Blue Press ENTER to change the Blue Gamma setting by using the
UP and DOWN arrows to Increase or Decrease the value
Orientation
Floor F.
Ceiling F.
Floor R.
Ceiling R.
Orientation Indicates you are in the Projector Orientation Setting menu
Floor F. Press ENTER to Set the projector to Front Projection mode
Ceiling F. Press ENTER to Set the projector to Inverted Front Projection
mode
Floor R. Press ENTER to Set the projector to Rear Projection mode
Ceiling R. Press ENTER to Set the projector to Inverted Rear Projection
mode
From the Image menu use the Up or Down arrow to select “Gamma” and press the Enter button to call up the
Gamma options.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
From the Preference menu use the Up or Down arrow to select “Orientation” and press the Enter button to call
up the Orientation options.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.