Runco VX-2c - Manual (Page 20)

19
MENU DESCRIPTION AND NAVIGATION
Orient
Orient
Use Preference window to select projector picture orientation
From the Main menu use the Up or Down arrow to select “Orient” and press the Enter button to call up the Orient
display. The Orient display allows selection of Picture Orientation options.
There are four options:
Floor F.: Floor Front configuration.
Ceiling F.: Ceiling Front configuration
Floor R.: Floor Rear configuration
Ceiling R.: Ceiling Rear configuration
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
Lens Adj.
Shift L/R
Shift U/D
Lens Zoom
Lens Focus
Use the Lens Adj. display to make lens adjustments
From the Main menu use the Up or Down arrow to select “Lens Adj.” and press the Enter button to call up the
Lens Adj. Options.
There are four options:
Shift L/R: Shift the image (mechanically) left or right.
Shift U/D: Shift the image (mechanically) up or down.
Lens Zoom: Decrease or Enlarge the image size (mechanically).
Lens Focus: Adjusting the image focus.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
Lens Adj. Indicates you are on the Lens setting menu
Shift L/R Press ENTER to Shift the lens Left and Right by using the
Left and Right arrows
Shift U/D Press ENTER to Shift the lens Up and Down by using the Up
and Down arrows
Lens Zoom Press ENTER to Focus the lens by using the Up and Down
arrows
Lens Focus Press ENTER to Zoom the lens by using the Up and Down
arrows
Preference Indicates you are on the Preference Settings menu
Orient Press ENTER to select the Orientation setting menu