Runco VX-2c - Manual (Page 21)

20
MENU DESCRIPTION AND NAVIGATION
Proj. Info
Model
S/N
Hardware Revision
Firmware Revision
Error Code
From the Main menu use the Up or Down arrow to select “Proj. Info” and press the Enter button to call up the
Status options.
There are five options:
Model: VX-2c should be displayed.
S/N: Projector serial number identification.
Hardware Rev.: Projector hardware revision.
Firmware Rev.: Current firmware revision.
Error Code: System error code
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.
Advanced
Diagnose
Lamp
Color
Reset to Default
Service
Under Advanced there are five sub-windows
Advanced Indicates you are on the Advanced Settings menu
Diagnose Press ENTER to access the Diagnostics menu
Lamp Press ENTER to access the Lamp Settings menu
Color Press ENTER to access the Color Settings menu
Reset to Default Press ENTER to set the Presets back to their Factory Default
settings and then confirm YES or NO with the arrows and
ENTER key
Service Press ENTER to access the Service Functions Menu
Proj. Info Indicates you are on the Status reading menu
Model Reports the Projector Model
S/N Reports the Projector Serial Number
Hardware
Revision
Reports the Projector Hardware Revision number
Firmware
Revision
Reports the Projector Firmware Revision number
Error Code Reports the last Projector Error Code received
From the Main menu use the Up or Down arrow to select “Advanced” and press the Enter button to call up the
Advanced options.
Use the Up or Down button to indication your selection and press the Enter button to make your selection.
Press the Menu button to exit.