Ssembly – Reebok Fitness RB 310 30711.0 User Manual

Page 5

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench and Phillips

screwdriver .

Use the part drawings below to identify the small parts used in assembly. The number in parentheses below

each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol-

lowing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preat-

tached. If a part is not in the parts bag, check to see if it has been preattached.

M8 x 19mm Button

Screw (77)–4

M8 x 16mm Button

Screw (54)–6

M8 Split

Washer (55)–14

M4 x 16mm

Round Head

Screw (80)–4

M6 Washer

(44)–7

M10 x 63mm Bolt Set (62)–1

M8 x 50mm Button

Screw (52)–4

M6 x 38mm Button

Screw (72)–3

M6 x 42mm Button

Screw (81)–4

1. Orient the Left Front Stabilizer (15) with the Wheel (17)

positioned as shown. Attach the Left Front Stabilizer to

the left side of the Frame (1) with three M8 x 16mm

Button Screws (54) and three M8 Split Washers (55).

Attach the Right Front Stabilizer (not shown) to the

right side of the Frame (1) in the same way.

SSEMBLY