Aintenance and, Roubleshooting – Reebok Fitness RB 310 30711.0 User Manual

Page 19

Inspect and tighten all parts of the exercise cycle reg-

ularly. Replace any worn parts immediately.

To clean the exercise cycle, use a damp cloth and a

small amount of mild soap. Important: To avoid dam-

age to the console, keep liquids away from the

console and keep the console out of direct sun-

light.

BATTERY REPLACEMENT

If the console display becomes dim, the batteries

should be replaced; most console problems are the

result of low batteries. See assembly step 5 on page

7 for replacement instructions.

HOW TO LEVEL THE EXERCISE CYCLE

After the exer-

cise cycle has

been moved to

the location

where it will be

used, make sure

that the ends of

both front stabi-

lizer are touching

the floor. If the

exercise cycle

rocks slightly during use, turn one or both of the level-

ing feet under the front stabilizers until the rocking

motion is eliminated.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function properly,

see step 5 on page 13.

HOW TO MOVE THE EXERCISE CYCLE

To move the exercise cycle, hold the handle on the

rear stabilizer and carefully lift it until the exercise

cycle can be moved on the front wheels. Carefully

move the exercise cycle to the desired location and

then lower it.

Handle

Wheel

Leveling

Foot

AINTENANCE AND

ROUBLESHOOTING