Radio Shack TAD-1015 - Manual (Page 9)

9
3. Route the adapter cord through
the upper and lower grooves and
the modular cord through only the
upper groove on the bottom of the
base.
4. Plug the modular cord’s other end
into the wall plate jack, then align
the base’s keyhole slots with the
wall plate studs and slide the base
downward to secure it.
Upper
Grooves
Lower
Groove
5. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
6. Press and lift out the handset
holder, rotate it 180°, then snap it
back into place so it holds the
handset.
7. Fully extend the base’s antenna
and raise it to a vertical position.
43-774.fm Page 9 Friday, August 13, 1999 3:14 PM