Radio Shack TAD-1015 - Manual (Page 8)

8
4. Route the adapter’s cord through
the strain relief slot on the back of
the base.
5. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
6. Fully extend the base’s antenna
and place it in a vertical position.
Mounting the Base
on a Wall Plate
To make this connection, you need a
short modular cord, such as Ra-
dioShack Cat. No. 279-390 (not sup-
plied).
1. Plug one end of the modular cord
into the TEL LINE jack on the back
of the base.
2. Plug the supplied AC adapter’s
barrel plug into the DC IN 9V jack.
Strain Relief Slot
43-774.fm Page 8 Friday, August 13, 1999 3:14 PM