Radio Shack TAD-1015 - Manual (Page 14)

14
Note: If your phone system
requires that you dial an access
code (
9 , for example) before you
dial an outside number, do not
press the access code either.
If the dial tone stops, you have
touch-tone service. Leave
P • • T
set to T .
If the dial tone continues, you
have pulse service. Set
P
• •
T to P
(pulse).
4. To hang up, either place the hand-
set on the base or press TALK on
the handset.
TURNING THE BASE’S
RINGER OFF/ON
To turn off the base’s ringer, set RING-
ER on the back of the base to OFF .
When a call comes in, any phone con-
nected to the same line as the TAD-
1015 and the handset (if it is off the
base) still ring, but the base does not.
When you want the base to ring again,
set
RINGER to ON .
43-774.fm Page 14 Friday, August 13, 1999 3:14 PM