Runco SP-50 - Manual (Page 67)

Serial Communications
Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 57
PRE
L
IMINAR
Y
MSTS11 4D 53 54 53 31 31 – – Sets 2-screen operation to 2 SCREEN
(side-by-side, full height; main screen
on left).
MSTS12 4D 53 54 53 31 32 – – Sets 2-screen operation to 2 SCREEN
(side-by-side, full height; main screen
on left).
Functional Lock
FCLS00 46 43 4C 53 30 30 – – Clears the FUNCTIONAL LOCK.
FCLS01 46 43 4C 53 30 31 – – Locks the main-control panel button
control.
FCLS02 46 43 4C 53 30 32 – – Locks the remote-control button con-
trol.
FCLS03 46 43 4C 53 30 33 – – Locks both main-control panel and
remote button control.
FCLS04 46 43 4C 53 30 34 – – Sets the MEMORY LOCK.
OSD
DOF 44 4F 46 – – Clears the current displayed OSD.
(Note 2)
SET-UP Menu Commands
CTPS01 43 54 50 53 30 31 – – Sets COLOR TEMP. to LOW.
CTPS02 43 54 50 53 30 32 – – Sets COLOR TEMP. to MID-LOW.
CTPS03 43 54 50 53 30 33 – – Sets COLOR TEMP. to MIDDLE.
CTPS04 43 54 50 53 30 34 – – Sets COLOR TEMP. to MID-HIGH.
Table 6-1. Serial Commands (continued)
Command Value Range
Description
ASCII HEX Minimum Maximum
Notes:
1. When making input-specific adjustments such as to image quality, screen position/size or audio
sub-volume, select the input you wish to affect before making such adjustments.
2. These settings are not stored in memory.