Cleaning the registration roller – Ricoh Aficio AP610i User Manual
Page 67

Cleaning the Printer
67
Cleaning the Registration Roller
If the registration roller is dirty, a misfeed might occur. In this case, clean the roll-
er as follows:
Clean the registration roller if dots (caused by specks of paper stuck to the roller)
appear on printed OHP transparencies.
A
Turn off the power, and then unplug the power cable.
B
Open the front cover by pushing the front cover release button.
C
Pull the toner cartridge out of the printer by holding the grips of the car-
tridge.
❒ Do not hold the toner cartridge upside down or stand it vertically.
• Be sure to turn off the power and wait for about 30 minutes before
cleaning the registration roller. Not waiting for the printer to cool
down can result in a burn.
• The inside of this printer becomes very hot. Do not touch parts labelled “v”
(indicating a hot surface). Touching these parts will result in burns.