Radio Shack 2-Line 900 MHz Handsfree Cordless Phone - Manual (Page 18)

18 Operation
3. To hang up one line, press the other line’s key. Press the
key again to hang up both lines.
CHANGING CHANNELS
Every time you press L1 or L2 , the phone automatically selects
a clear channel from the 10 it uses for communication between
the headset and the base.
If you hear interference during a call, repeatedly press CHAN-
NEL to change the channel until you get a clear one.
USING REDIAL
To quickly redial the last number dialed, press L1 or L2 then RE-
DIAL/PAUSE .
The redial memory holds up to 32 digits, so you can redial long-
distance as well as local numbers. The redial memory can also
store tone entries (see“Using Tone Services on a Pulse Line”
on Page 19) and pause entries (see “Entering a Pause in Mem-
ory Number” on Page 21).
If the number you dialed is busy, press REDIAL/PAUSE without
hanging up the phone to redial the number. The dial tone
sounds for about 2 seconds, then the phone redials the number.
USING MUTE
To talk to someone else in the room without the person on the
other end of the phone line hearing your conversation, press
MUTE . The indicator for the line you are using flashes. Press
MUTE again to resume your phone conversation.
43-1701.fm Page 18 Wednesday, September 20, 2000 8:48 AM