RCA Dual Alarm Clock RP3720 - Manual (Page 8)

EN EN
Built-In AFC
The Built-In Automatic Frequency
Control (AFC) works only on FM. It
helps to reduce drift on FM reception
and to keep the radio locked in on the
FM station to which it is tuned.
Antennas
AM Antenna - A built-in ferrite rod
antenna eliminates the need for an
outside antenna for AM reception.
Rotating the unit slightly may improve
reception of distant AM stations.
FM Antenna - The power cord acts as
your FM antenna. The power cord
picks up moderate to strong stations
and eliminates the need for an external
antenna in most strong signal areas.
Be sure the power cord is stretched out
to its full length. Do not coil or bunch
the cord together. Changing position
of the power cord may improve
reception.
Turning on/off the Radio
Press the ON/OFF button on the top of
the unit to turn on the radio.
Press again to turn off the radio.
Selecting Bands
Slide the band switch on the side of
the unit to select between FM and AM
band.
Tuning to Stations
Rotate the TUNING knob on the side
of the unit clockwise to tune up radio
frequency.
Rotate it counter-clockwise to tune
down radio frequency.
Radio
8 9
Setting the Clock
Setting Clock
1. Slide the Function Selector to TIME to
enter clock setting mode.
2. Rotate the scroll wheel around the
ON/OFF button clockwise to increase
clock time and rotate it counter-
clockwise to decrease clock time.
3. Slide the Function Selector to lock .
1 2 ON OFF
DUAL WAKE
M IN M A X
V O L U ME CON T R O L
CAN CEL
SLEEP
SNOOZE
AUTO BRIGHTNESS
W
A
K
E
W
A
K
E
Note: Note: Note: Note: Note:
The clock is in 12 hour format.
The AM or PM indicator lights to
show am and pm time.
1 & 3 2
Tip: Tip: Tip: Tip: Tip:
Radio frequency will not be
displayed when setting the clock
or wake time in radio mode.
Tip: Tip: Tip: Tip: Tip:
The “:” flashes on the display in
clock setting mode.
Tip: Tip: Tip: Tip: Tip:
Radio frequency will not be
displayed when setting the clock
or wake time in radio mode.
A_RP3720 EN 3/25/04, 9:21 AM 12-13