RCA RC66I - Manual

QSG v1.0 (1.0.1.0) (EN/F/E)
Quick Setup Guide
A built-in automatic time set system is equipped in this clock, follow
the instructions below to get the clock time shown correctly:
1. Plug for power
Plug in AC/DC adaptor into an AC power outlet.
2. Select daylight saving
If applicable in your area, activate the
daylight saving time by pressing and
holding the DST switch on the top of
the unit. A confi rmation message
shows on the display when daylight
saving time is active.
3. Select your time zone
Press
TIME ZONE repeatedly on the top of the unit to cycle
through the time zones.
Time Zone
EST
Eastern (default)
CST
Central
MST Mountain
PST
Pacifi c
AKST Alaskan
HST Hawaii-Aleutian
AST Atlantic
Your clock is now set and ready for use.
Front view
Vue de l’avant
Vista frontal
Off (standby
mode)
(mode
d’attente)
(modo
standby)
Sound source selection
Sélection de la source
audio
Selección de fuente de
sonido
Display
Affi chage
Pantalla
Selecting sound source
To select the sound source, press the four touch control keys on the
front panel of the unit.
Selección de fuente de música
Para seleccionar la fuente de sonido, presione las cuatro teclas de
control en la parte superior de la unidad
Sélection de la source audio
Pour sélectionner la source audio, appuyez sur l’une des quatre touches
de commandes situées sur le panneau frontal de l’appareil.