RCA RIR200 - Manual

RIR200
QuickStartGuide
Congratulations on purchasing your new RCA Wi-Fi Internet Radio.
Please follow these instructions to set up and start using the radio.
www.rcaaudiovideo.com
v1.0 (EN)
Unpack the unit
You should fi nd the following items in the box:
1
Additional requirements
• Broadband Internet service
• Broadband (cable/DSL) modem, usually supplied by your Internet service provider
• An 802.11 b or g (Wi-Fi) wireless home network or Ethernet router/switch/hub with available
LAN port
For Wi-Fi connections, you may also need:
•
Your wireless network’s SSID
• Your access password (for secure networks)
Setup your RCA Infi nite Radio accounts
To simplify setup and avoid manual confi guration on the radio please complete these steps:
1. Find the Setup Information Card that contains your radio’s MAC address number (MAC:
00-00-00-00-00-00) and activation PIN # (PIN: 0000). (This number is also found in the Device
Info screen under the Settings menu in your radio.)
2. Using any Internet-connected computer, go to www.rcainfi niteradio.com/setup and follow
the online instructions.
• You will need to input your radio’s MAC address and PIN # to associate your radio with your
personal settings.
Radio
Setup
Information
Card
Insert AAA batteries in the base of the radio
3
Ethernet cable
Follow the polarity markers in the battery
compartment.
The batteries (not included) power the
clock and alarm whenever the radio loses
electricity.
Plug in and turn on the radio
5
1. NOTE: When you turn on the radio for the fi rst time,
it will be in “DEMO” mode. To exit this mode, press
preset 1, then SLEEP/SNOOZE, then preset 6 on
top of the radio.
2. After exiting the DEMO
mode, the radio displays
the Select Language
screen. Choose your
preferred language.
3. The Internet Setup screen
then displays:
• Connecting via Ethernet
– In the Internet Setup screen,
choose Wired. The radio
should then connect to the Internet.
• Connecting via wireless
– In the Internet Setup screen, choose Wireless.
– To display a list of available networks, choose
Detect Networks, then choose your network.
– To use a known network SSID, choose Enter SSID
and then input your SSID.
3. If the network is secure, enter your password in
the Network Security screen. The radio should then
connect to the Internet.
After connecting to the Internet
• If you did not activate your Infi nite Radio accounts,
or if the radio cannot get your details from the
Infi nite Radio server, the radio may ask for your ZIP code. Input your code.
•
If your radio has successfully connected to the Internet you will hear a welcome message.
Use the navigation controls to make
choices and input information:
− move highlight up
– move highlight down
– move selection/navigate left
– move selection/navigate right
SELECT - confi rm selected option or
character
When inputting characters, press or
to choose among uppercase, lowercase,
numeric, or special characters.
To insert spaces or correct mistakes, press
to display the Commands list and then
press or to choose the desired
command.
Learn more about your Internet Radio
Read the user manual (download from www.rcainfi niteradio.com) for more information on the
player’s features, safety and warranty information, and answers to Frequently Asked Questions (FAQ’s).
Need more help?
Do not return this product to the store.
Visit www.rcainfi niteradio.com to get the latest fi rmware updates and FAQ’s.
Quick Start
Guide (this
leafl et)
Optional: Connect the radio using an Ethernet cable
4
Set up the radio
6
Use an Ethernet cable if you do not have a Wi-Fi access point.
LAN
LAN
LAN
Broadband modem or
Ethernet router/hub/switch
!
2
Power adapter AM loop antenna
About passphrase:
•
This radio supports secured access
points using the Wireless Equivalent
Privacy (WEP) keys or Wi-Fi Protected
Access (WPA and WPA2) standards.
• WEP keys are either 10 or 26
characters long (e.g. 6e78214a52).
Some access points for WEP
support passphrases (e.g. changing
entertainment again) which do not
conform to the industry standard and
are not supported in this radio.
• If you are using a WEP secured access
point, enter the WEP key (HEX format)
instead of the passphrase.
Electrical outlet
Press preset 1, then SLEEP/
SNOOZE, then preset 6.
Deactivate the DEMO mode
after turning on
Press or to highlight,
SELECT to confi rm.
Press to show “DONE”
and SELECT to confi rm.