Section 4 notice – Renesas SuperHTM Family SH72546RFCC User Manual
Page 35
Section 4 Notice
Rev. 1.00 Nov. 18, 2008 Page 17 of 18
REJ10J1937-0100
Section 4 Notice
1. Before connecting any parts or cables, make sure that pin 1 on the both sides are correctly
aligned.
2. Do not apply excessive force to the user-system interface converter board while it is connected
to the user system.
3. The dimensions of the recommended mount pad for the IC socket for this user-system
interface converter board are different from those of the MPU.
4. This user-system interface converter board is specifically designed for the SH72546RFCC,
SH72544R, SH72543R, SH72531, and SH72531FCC E200F EV-chip unit
(R0E572546VKK00). Do not use this board with any other emulator.
5. When power is not supplied to the Vcc pin on the user-system interface converter board, the
emulator displays ** VCC DOWN. The emulator will not operate correctly.