Renesas SuperHTM Family SH72546RFCC - Manual (Page 25)

Section 3 Connection Procedures
Rev. 1.00 Nov. 18, 2008 Page 7 of 18
REJ10J1937-0100
Connect the common user-system interface cable (cable unit) to CONNECTOR1 of the
common user-system interface adaptor cable (board unit) as shown below.
Then connect the common user system interface adaptor cable (cable unit) to CONNECTOR2.
Connect the common user-system interface adaptor cable (cable unit) to CONNECTOR3.
Connect the common user-system interface adaptor cable (board unit) with the user-system interface converter
board via the common user-system interface cable (cable unit) by aligning the connector numbers on those boards.
Figure 2 Assembling the User System Interface Cable