Renesas SuperHTM Family SH72546RFCC - Manual (Page 33)

Section 3 Connection Procedures
Rev. 1.00 Nov. 18, 2008 Page 15 of 18
REJ10J1937-0100
3.3 Verifying Operation
1. Turn on the emulator according to the procedures described in the SH-2A, SH-2 E200F
Emulator User's Manual, Supplementary information on Using the SH72546RFCC,
SH72544R, SH72543R, SH72531, and SH72531FCC (R0E0200F1EMU00E or
R0E572546EMU00E).
2. The emulator connected to this user-system interface converter board supports two kinds of
clock sources as the MPU clock. For details, refer to the SH-2A, SH-2 E200F Emulator User's
Manual (R0E0200F1EMU00E).
⎯ To use the emulator internal clock
Select the clock in the emulator by the CLOCK command (emulator command).
⎯ To use the external clock on the user system
Supply the external clock from the user system to the emulator by inputting the EXTAL
pin (pin A14) on the user-system interface converter board. For details, refer to section 3,
Clock Pulse Generator, in the SH72546R Group Hardware Manual.