RCA Pro870 FR - Manual (Page 4)

ii
Your video camcorder’s AC adapter/charger will operate on 100-240 volts AC, 50/60 Hz, and
has a polarized plug. Because one blade of the plug is wider than the other, the plug fits in the
wall socket only one way. Do not defeat the safety feature of this plug. If you need an
extension cord, use a polarized extension cord.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
ATENTION: POUR E ´ VITER LES CHOCS E ´ LECTRIQUES , INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU
’
AU FOND
.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK , DO NOT REMOVE
THE COVER ( OR BACK ). NO USER - SERVICEABLE PARTS ARE INSIDE . IF YOU
SPILL LIQUID ON THE CAMCORDER OR ADAPTER / CHARGER , DISCONNECT THE
AC ADAPTER / CHARGER ’ S POWER CORD TO PREVENT POSSIBLE FIRE OR SHOCK
HAZARD AND CONSULT AUTHORIZED SERVICE PERSONNEL . MOISTURE CAN
DAMAGE INTERNAL PARTS . REFER ALL SERVICE TO AUTHORIZED RCA
COMPACT CAMCORDER SERVICENTER PERSONNEL ONLY
.
Caution: Read “Important Safety Instructions for AC Adapter/Charger” on the next page
before using the AC adapter/charger.
Caution:
Maintain electrical safety. Powerline-operated equipment or accessories
connected to this unit should bear the UL listing mark or CSA certification mark on the
accessories themselves and should not have been modified so as to defeat the safety features.
This will help avoid any potential hazard from electric shock or fire. If in doubt, contact
qualified service personnel.
WARNING:
To prevent fire or shock hazard, do not expose camcorder or
AC adapter/charger to rain or moisture.
Caution: Avoid operating your camcorder immediately after moving it from a cold location
to a warm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperature before
inserting a video cassette. When moved from a cold area to a warm location, moisture may
condense on the head drum inside the machine. This moisture could cause the tape to stick to
the headwheel and damage the headwheel or tape.
The symbol of a lightning flash
within a triangle is intended to
alert the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
and which may be of sufficient
magnitude to constitute a risk of
electric shock. An exclamation point within a
triangle is intended to alert the
user to the presence of important
operating and maintenance
(service) instructions in the
literature accompanying the
product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MISE EN GARDE
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
SAFETY PRECAUTIONS