Roland V-ACCORDION FR-5 - Manual (Page 60)

Editing sounds | 7. ORC CHD EDIT parameters
60
r
FR-7/FR-5 V-Accordion
7.2 Reverb Send, 7.3 Chorus Send,
7.4 Delay Send
(0~127 for all three) Use these
parameters to set the Reverb, Chorus
or Delay send level (how much effect
should be applied to the Orchestra
Chord section). The higher the value
you set, the more the Orchestra sec-
tion will be processed by the effect in
question.
It works much the same way as a
cathedral: the louder you sing, the
more reverb (chorus or delay) you hear. In the case of
the cathedral, singing louder means that you increase
the effect send level, i.e. the level of the signal (your
voice) that will be processed by the acoustic environ-
ment.
The other sections (Bass, Free Bass, etc.) have the same
parameters, so that you can create a sound image with
various “levels” (foreground, background).
The effects themselves can be edited on separate pages
(see p. 64).
7.5 Orc Chord MIDI TX
This page contains a series of
MIDI parameters for the Orches-
tra section you need to set one
by one. See page 86 for details
about the MIDI parameters.
These parameters are saved along with all other Set
parameters, which allows you to use different MIDI set-
tings for each Set.