Roberts Radio RDK-2 - Manual (Page 39)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
38
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Switch on your radio.
2. Touch in the info button for 2-3 seconds until "Station order" appears
on the display.
3. Touch the Tuning Up/Down buttons to step through the options until
the display shows "Factory reset".
4. Touch the Select button and the display will show "Press SELECT
to confi rm reset . . .".
5. Touch the Select button once more to confi rm. A full reset of the radio
will be performed and all presets, station lists and the alarm setting
will be erased. After the reset is completed, a quick scan of UK DAB
band III frequencies will be carried out.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
3
2
3
4,5