Roberts Radio RDK-2 - Manual (Page 18)

17
Dynamic Range Control (DRC) settings - DAB
The DRC facility can make quieter sounds easier to hear when your radio
is used in a noisy environment.
1. Touch the On/Standby button to switch on your radio.
2. Touch the Info button for 2-3 seconds until the display shows “Station
order.”
3. Touch the Tuning Up/Down button until the display shows "DRC
value".
4. Touch the Select button to enter adjustment mode.
5. Touch the Tuning Up/Down button to select required DRC setting
(default is 0) .
DRC 0 DRC is switched off, broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6. Touch the Select button to confi rm the setting. The display will return
to radio mode.
Note: Not all DAB broadcasts use the DRC function. If the broadcast
does not provide DRC information, then the DRC setting in the radio will
have no effect.
2
1
3,5
3,5
4,6