Selecting and recording the track for each, Hand separately” (p. 24)), To “selecting and recording – Roland MP-60 User Manual

Page 24: The track for each hand, Separately” (p. 24)

Chapter 4. Recording Your Performance

Selecting and Recording the Track for Each

Hand Separately

The recorder of the MP-60 has two recording tracks, allowing you to record the right

and left hands separately. Use the [1] button or [2] button to specify the recording

track.

If you want to re-do the recording, you can re-record just a specific track.

fig.panel4-4

As described in steps

and

of “Recording a New Song” (p. 22), select “USr” before

you continue.

As necessary, turn on the metronome (p. 14).

Press the [REC] button.

The [REC] button’s indicator will light.

The button indicators of tracks that are already recorded will light.

The track button for which you will next be recording will be blinking.

Selecting the track to record

Press the [1] or [2] button to select the track that you want to record.

The indicator of the button you pressed will blink, and the MP-60 enters recording-

standby mode.

Start recording

Press the [PLAY] button.

The MP-60 counts down two measures, then recording starts.

Note that recording will also begin as soon as you play anything on the keyboard,

even if you do not press the [PLAY] button. There is no count sound played when

you start in this manner.

Stop recording

Press the [PLAY] or [REC] button.

Recording will stop, and the indicators for the [PLAY] and [REC] buttons will go

dark.

Your performance has been recorded to the specified track button.

If you want to record on the other track, return to step 2 to record your performance

again. You can record while you listen to the previously recorded performance.

Play back the recorded performance

Press the [PLAY] button.

You will hear the recorded performance.

Press the [PLAY] button once again, and playback will stop.

NOTE

If you go on to record

additional material without

erasing the recorded song, the

song tempo, beat, and

metronome settings of the

original recording will be used

for the new material as well.

2, 5

4, 6

The track buttons allow you to

record to either the [1] or the

[2] button, one at a time.

When a recorded performance

is played back, the metronome

sounds the sound that was

selected when the recording

was made.

MP-60_e.book 24 ページ２００５年３月２３日　水曜日　午後５時５２分