Roland MP-60 - Manual (Page 12)

12
Chapter 2. Performance
Playing Two Tones Together
(Dual Play)
Simultaneously playing two tones when one key is pressed is called “Dual play.”
1
Simultaneously press the two TONE SELECT buttons that you want to
play together.
The indicator of the button you pressed will light.
When you play the keyboard, the tones of the two TONE SELECT buttons you
selected will sound simultaneously.
To cancel Dual play, press any TONE SELECT button.
To change the tone of the right button of the two selected tones
Press the [VARIATION] button.
Dual play now features the tone of the left side’s TONE SELECT button along with
the newly selected tone.
To change the tone of the left button of the two selected tones
Cancel the Dual play, and then re-select the tone.
■ Adjusting the Volume Balance in Dual Play
(Dual Balance)
You can change the volume balance between the two layered sounds in Dual play.
fig.panel2-2
1
Hold down the [TRANSPOSE] button and press the [SPLIT] button.
The indicators of the buttons you pressed will blink.
The current volume balance appears in the display.
2
Press the [+] or [-] button to change the value.
The volume balance will change.
To return to the original volume balance, press the [+] and [-] buttons simultaneously.
fig.disp-dualbal.e
Press the [TRANSPOSE] or [SPLIT] button, and the button’s indicator will return to
the previous state.
When Dual play is used, the
[VARIATION] button’s
indicator will light to indicate
the selection of the right button
of the two selected tones.
When Dual play is used, only
sound number 1 or 2 can be
selected.
If you use Dual play with a
TONE SELECT button for
which tone number 3 is
selected, tone number 1 will be
selected for that TONE
SELECT button.
1 2
When the power is turned on,
this will be set to “8-2”
(volume of the left button tone
- volume of the right button
tone).
Volume of the left button tone Volume of the right button tone
MP-60_e.book 12 ページ ２００５年３月２３日 水曜日 午後５時５２分