Roland MT-90U - Manual (Page 21)

21
MT-90U Basic Operation
When the song has a pick up measure (notes start before the first full measure), “PU”
appears in the display and then the measure numbers appear.
3.
Press the [ (Play)] button.
The song starts playing. The song automatically plays until the end and then stops.
4.
To stop playing the song, press the [ (Stop)] button.
When the song is stopped, a [+] appears next to the measure number at which it is
stopped.
If you connect a pedal switch (Roland DP-2, sold separately) to the Start/Stop connector
on the rear panel, you can start and stop playing a song by simply pressing the pedal
(p. 53).
Rewinding and fast forwarding a song
1.
Press the [ (Bwd)] or [ (Fwd)] button to move to the sections and measures of
music you want to hear.
Press the [ (Bwd)] or [ (Fwd)] button once and the song moves backward or
forward one measure at a time.
Press and hold the buttons to rewind or fast forward through a song. You can also rewind
or fast forward a song while it is playing.
When a song starts to play, the measure number on the display flashes. This flashing
indicates that the MT-90U is reading the data from the USB memory. While the number
is flashing, you cannot rewind or fast forward. Wait a short while and then try again.
Folder
Press the [ (Play)] button to enter the folder.
Up one folder
Press the [ (Play)] button to move up one folder.
Display Description
Forward Backward
MT-90U_r_e1.book 21 ページ ２００８年３月２４日 月曜日 午後４時４６分