Radio Shack ET-1110 - Manual (Page 8)

8
2. Plug one end of the supplied long
modular cord into the phone jack on
the back of the base.
3. Insert the supplied AC adapter’s
barrel plug into the DC 9V jack on
the back of the base.
4. Route the adapter’s cord through
the strain relief slot on the bottom of
the base.
5. Insert the tabs on the narrow end of
the bracket into both slots on the
bottom of the base as shown and
push the tabs on the wide end of the
bracket into the upper slots on the
bottom of the base.
6. Plug the modular cord’s other end
into a modular phone line jack.
7. Plug the adapter into a standard AC
outlet.
43-1110.fm Page 8 Wednesday, August 18, 1999 8:22 AM