Radio Shack ET-1110 - Manual (Page 20)

20
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these
special tone services by following these
steps.
1. Be sure T/P is set to P .
2. Dial the service’s main number.
3. When the service answers, press
. Q appears. Any additional num-
bers you dial are sent as tone sig-
nals.
4. After you complete the call, return
the handset to the base or press
TALK. The phone automatically re-
sets to pulse dialing.
USING PAGE
To page the person who has the handset
or to locate the handset when the phone
is not in use, press
PAGE on the base.
The handset beeps three times and
Paging you appears. If you want the
handset to beep for a longer time, hold
down
PAGE for about 3 seconds. The
handset beeps for 3 minutes.
To stop the handset from beeping before
it automatically stops, press
TALK on the
handset twice or PAGE on the base.
Note: You cannot page the handset dur-
ing a call.
43-1110.fm Page 20 Wednesday, August 18, 1999 8:22 AM