Radio Shack ET-1110 - Manual (Page 12)

12
6. Insert the tabs on the narrow end of
the bracket into the slots on the bot-
tom of the base as shown, guide the
modular and adapter cords through
the slots on the wide end of the
bracket, then push the tabs on the
wide end of the bracket into the low-
er slots on the bottom of the base.
7. Align the base’s keyhole slots with
the mounting screws, and slide the
base downward to secure it.
8. Plug the adapter into a standard AC
outlet.
9. Plug the modular cord into a modu-
lar phone line jack.
10. Fully extend the base’s antenna and
raise it to a vertical position.
43-1110.fm Page 12 Wednesday, August 18, 1999 8:22 AM