Radio Shack ET-1110 - Manual (Page 10)

10
5. Insert the tabs on the narrow end of
the bracket into the slots on the bot-
tom of the base as shown and route
the other end of the short modular
cord through the center of the brack-
et.
6. Push the tabs on the wide end of the
bracket into the lower slots on the
bottom of the base.
7. Plug the short modular cord’s other
end into the wall plate jack, align the
base’s keyhole slots with the wall
plate studs, and slide the base
downward to secure it.
8. Plug the adapter into a standard AC
outlet.
9. Fully extend the base’s antenna and
raise it to a vertical position.
43-1110.fm Page 10 Wednesday, August 18, 1999 8:22 AM