Roland PRELUDE MUSIC KEYBOARD 2 - Manual (Page 45)

45
Other added functions
(Owner’s manual p. 37)
A new “Chord Zone” parameter has been added to the
performance settings, allowing you to specify the key range
for chord detection.
1. Press [MENU].
2. Use [ ] [ ] to select “Perform Edit” then press [ENTER].
3. Use [ ] [ ] to select the PERFORM GENERAL screen
(if it is not already selected), and use [ ] [ ] to select
“Chord Zone.”
4. Turn the VALUE dial to edit the value.
5. When you’re finished making system settings, press [EXIT].
The Chord Zone setting applies only to the keyboard of the
Prelude itself. If NTA is turned on, chords will be detected
using the entire range of notes from an external MIDI device.
Chord Zone
Parameter Value Explanation
Chord
Zone
OFF
Chord detection will not be
performed.
LEFT
Chords played to the left of
the split point will be
detected.
RIGHT
Chords played to the right of
the split point will be
detected.
WHOLE
Chords will be detected in
the entire key range.
Prelude_OM_Ver2.book Page 45 Wednesday, September 9, 2009 5:38 PM