Ricoh Aficio FX200 - Manual (Page 68)

2
G ETTING S TARTED 2.43
Repairing Software
Repair is required if your installation fails or the software does
not work properly. This Repair procedure does not physically
repair SmarThru software.
Printer driver, Scanner driver, Printer Settings Utility and Set IP
programs could be repaired.
1 Start Windows.
2 From the Start menu select Programs or All Programs →
Type 103 → Maintenance.
3 Select Repair and click Next.
N OTES : If your printer is not already connected to the computer,
the following window will appear.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click Next,
and No on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
4 Select the components you want to reinstall and click Next.
If you select Printer Driver Type 103 PCL 6, the window
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click Next.
b. If the test page prints out correctly, click Yes.
If it doesn’t, click No to reprint it.
5 When the reinstallation is done, click Finish.