Ricoh Aficio FX200 - Manual (Page 141)

S CANNING 6.12
Using the Network Scan Driver
Adding a Scanner
To register your scanner as an authorized network scanner, use
the ScanClair Type 103 window.
1 You can select Start → Programs → ScanClair Type 103
→ ScanClair Type 103.
2 In the ScanClair Type 103 window, click the Add Device
button, or double-click the Add Device icon.
3 Click Next.
4 Select Browse for a scanner. (recommended), or
Connect to this scanner. and enter an IP address for the
scanner, and click Next.