Ricoh Aficio FX200 - Manual (Page 116)

5
C OPYING 5.3
Preparing a Document
You can use the document glass or the Automatic Document
Feeder (ADF) to load an original document for copying,
scanning, and sending a fax. Using the ADF, you can load up to
50 documents (47 ~ 105 g/m 2 , 12.5 ~ 28 lb) for one job. You
can, of course, place only one sheet at a time on the document
glass.
When you use the ADF:
• Do not load documents smaller than 142 x 127 mm or
larger than 216 x 356 mm.
• Do not attempt to feed the following types of documents:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
• Remove all staples and paper clips before loading
documents.
• Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading documents.
• Do not load documents that include different sizes or
weights of paper.
• Do not load booklet, pamphlet, transparencies, or
documents having other unusual characteristics.