Rhinotek F-4243C - Manual (Page 30)

INTRODUCTION
1625 01/11 Introduction Section 2-2
© 2011 Alamo Group Inc.
INTRODUCTION
The 1625 Loader is designed with care and built with quality materials by skilled workers. Proper assembly,
maintenance, and operating practices, as described in this manual, will help the owner/operator get years of
satisfactory service from the machine.
The purpose of this manual is to familiarize and instruct. The Assembly Section instructs the owner/operator in
the correct assembly of the Front End Loader using standard and optional equipment. The Parts manual is
designed to familiarize the owner/operator with replaceable parts on the Loader. This Part Manual provides
exploded assembly drawings of each Loader component illustrating each piece and the corresponding part
number.
Careful use and timely service saves extensive repairs and costly downtime losses. The Operation and
Maintenance Sections of the manual train the owner/operator how to work the Front End Loader correctly and
attend to appropriate maintenance. The Trouble Shooting Guide helps diagnose difficulties and offers solution
to the problems.
Safety is of primary importance to the owner/operator and to the manufacturer. The first section of this manual
includes a list of Safety Messages, that, if followed, will help protect the operator and bystanders from injury or
death. Many of the Safety Messages will be repeated throughout the manual. The owner/operator/dealer
should know these Safety Messages before assembly and be aware of the hazards of operating this Loader
during assembly, use, and maintenance. The Safety Alert Symbol combined with a Signal Word, as seen
below, is intended to warn the owner/operator of impending hazards and the degree of possible injury faced
when operating this machine.
It is recommended that tractor wheels be moved to the widest setting and rear ballast be
applied to increase tractor stability. Set the tractor’s front tread width to 1280MM (50.4”) on a
2WD machine (4WD tractor is not adjustable) to provide adequate clearance. For better
stability, set the rear tread to 1375MM (54.1”) or wider.
Never allow children to operate, ride on, or come close to the Tractor or
Implement. Usually, 16-17 year-old children who are mature and
responsible can operate the implement with adult supervision, if they
have read and understand the Operator’s Manuals, been trained in
proper operation of the tractor and Implement, and are physically large
enough to reach and operate the controls easily.
(SG-11)
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.
(SG-10)
Never allow children to play on or around Tractor or Implement. Children can slip or fall off
the Equipment and be injured or killed. Inadvertent contact with controls can cause the
Implement to shift or fall crushing themselves or others.
(SG-25)