RCA CC417 - Manual (Page 28)

26
Date and Time Display
12:00AM
1/ 1/95
TRACKING REC/PAUSE
OFF OWER VCR REW PLAY F.FWD STOP/EJECT
TITLE SEL – + EDIT – ADV
REVIEW DISPLAY RESET DATE TITLER CAMERA OFF VCR
POWER
REW PLAY F.FWD
TITLE SEL
STOP/EJECT
EDIT – ADV – + /TIME
1. Attach a power supply (battery or
adapter/charger) to the camcorder.
2. Press and hold the small button on
POWER and place in CAMERA.
3. Press DATE / T IME to display the date
and time in the viewfinder. A flashing
cursor lets you know which part of
the display you are setting.
Note: If flashing cursor does not appear,
press and hold DATE/TIME and then press
STOP/EJECT.
5. When the correct digit is displayed,
press STOP/EJECT. The cursor will
move to the next part of the display.
6. Repeat steps 4 and 5 to set the correct
month, day, year, hour, minute(s), and
AM/PM.
7. After setting AM or PM, press
DATE/TIME to remove the flashing
cursor and start the internal clock.
To Correct the Date or Time
To correct the date or time, press and
hold DATE/TIME and then press
STOP/EJECT. The display will appear in
the viewfinder along with the flashing
cursor. Use F.FWD and REW to correct
the time or date. Press DATE/TIME to
remove the flashing cursor and start the
clock.
4. Repeatedly press F.FWD or REW until
correct month appears. Press and hold
the button to advance the digits faster.
STOP/EJECT
POWER
REW (Rewind)
F.FWD (Fast Forward)
DATE/TIME
Set the Time and Date