RCA CC417 - Manual (Page 14)

12
Powering the Camcorder
Attach Charged Battery
1. Align reference arrow on battery with
arrow on camcorder. Hold battery
flush against camcorder while sliding
it down in the direction of the arrow as
shown.
2. Press and hold small button on
POWER while placing it in CAMERA.
POWER indicator will light if battery
is properly attached.
Using the Battery to Power Your Camcorder
BRIGHT FOCUS
POWER Switch
and Indicator
BATTERY
Eject Switch
Align Arrows
Rechargeable
Battery
Hold Battery
Flush and
Slide Down
Remove the Battery
1. Slide POWER to OFF. POWER
indicator will turn off.
2. Press and hold BATTERY eject while
sliding battery up and off the
camcorder.
ATTENTION: LEAD-ACID BATTERY MUST BE DISPOSED
OF PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED
USES A RECHARGEABLE BATTERY. AT THE END OF ITS
USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT
MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE
MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL
SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR
RECYCLING OPTIONS OR PROPER DISPOSAL.
Pb