Roland FP-2 - Manual (Page 38)

38
Chapter 4 Other Functions
You can make a variety of performance- and recording-
related settings in “Function Mode.”
How to Make Settings
1. Hold down the [Display] button, and press the [-]
button.
fig.04-01
“Fnc” appears in the display, and the FP-2 switches to
Function Mode.
The indicators flash on the [Display] button and buttons
to which a function is assigned.
2. Press any flashing button (other than the
[Display] button).
The indicators on all buttons except the pressed button
and the [Display] button go off.
Each value is displayed.
While pressing the button, function name is displayed.
3. Press the [-] or [+] button or play a key on the
keyboard to set.
fig.04-01
4. Press the [Display] button to exit Function Mode.
The button’s indicator will return to the previous state.
Press While holding
down...
Press
or
Play a key
Button Function Page
[Reverb]
Setting the part to which
effects are added
p. 41
[Effects] Effect Type p. 40
[Transpose] Temperament p. 42
[Split] Octave shift p. 41
[Piano] Master Tuning p. 41
[E. Piano]
How the soft pedal(FC2)
effects are applied
p. 39
[Organ]
How the sostenuto pedal(FC1)
effects are applied
p. 39
[Guitar/Bass]
How the damper pedal effects
are applied
p. 39
[Strings/Pad] Soft pedal(FC2)s work p. 40
[Voice/GM2] Sostenuto pedal(FC1)s work p. 40
[
(Metronome)]
Metronome beat
p. 42
[Start/Stop]
Setting the Intro and Ending
on or off
p. 43
[Part]
Root note of the chord pro-
gression
p. 43
[Chord
Progression] Fixing a set chord progression
p. 43
[Play/Stop] Chord display p. 43
[Rec] MIDI settings p. 47
[Sound
Control]
Bulk Dump, Pedal Shift,
Transferring the program
change
p. 48
[Equalizer] Equalizer p. 44
FP-2_e.book 38 ページ ２００４年１１月２６日 金曜日 午後４時２５分