Roland FP-2 - Manual (Page 21)

21
Chapter 1 Playing the Keyboard
Adding Reverberation to Sounds (The Reverb Effect)
You can apply a reverb effect to the notes you play on the keyboard. With
the reverb effect, you obtain a pleasant reverberation, making it sound as if
you were performing in a concert hall or similar space.
fig.01-21
1.
Press the [Reverb] button, getting its indicator to light.
Try fingering the keyboard.
The reverb effect is applied to the entire tone.
2.
The eliminate the Reverb effect, press the [Reverb] button
once more, extinguishing the indicator.
■ Changing the Depth of Reverb Effect
You can select from ten levels of depth for the reverb effect.
1.
Hold down the [Reverb] button and press the [-] or [+]
button.
The selected depth for the reverb effect appears in the display.
1,2
NOTE
You cannot make separate
reverb effect depth settings
for each individual tone.
NOTE
You cannot change reverb
effect depth of Session
Partner, Demo songs, and
Internal song.
While holding down... Press
FP-2_e.book 21 ページ ２００４年１１月２６日 金曜日 午後４時２５分