Raritan Computer SCS232 - Manual (Page 26)

18 C ONSOLE S WITCH SCS232 U SER ’ S M ANUAL
D — Display Scan List
To see a list of all channels on your scan list, press
D
↵ . This screen is identical to the channel selection and
display screen referenced earlier in this manual (Figure 10). From this screen, you may still invoke any Channel
Scanning command, or press
S
↵ to redisplay the Channel Scanning menu.
K# — Skip Channel in Scan List
Press
K#
↵ to remove channel number
#
from your scan list.
L# — Add Channel to Scan List
Press
L#
↵ to add channel number
#
to your scan list.
C — Clear Scan List
Press
C
↵ to clear all channels from your scan list.
R# — Resume Scanning
Press
R#
↵ to resume scanning through your scan list at an interval of
#
seconds per channel. During
scanning, the number of the channel being viewed will be displayed on the attached terminal. Press any key to
stop the scan and return to the Channel Scanning Menu.
You may use the
R#
↵ command to alter your scan rate, or simply enter
R
↵ to resume scanning at the
previous (or default) rate.
V
IEWING
S
TORED
D
ATA
ConsoleSwitch allows users to troubleshoot problems with attached devices by storing and making available the
latest activity that occurred on each port connected to ConsoleSwitch. To view stored data, you must first
select a channel (see previous section, “Channel Navigation”), and the latest page of data will be displayed.
To see more data, press <CTRL+G> to enter HotKey mode. Then, from the main menu, press
V
↵ to access
additional scan commands.
View Commands Menu
L Display Latest Data
O Display Oldest Data
P Display Previous Page
N Display Next Page
F# Forward # Lines
R# Reverse # Lines
P# Set Page Length to # Lines
Y# Clear Channel # Data
H Exit to Main Menu
Figure 12. View Stored Data Menu
L — Display Latest Data
Moves the screen to the most recent full screen of stored data.
O — Display Oldest Data
Moves the screen to the oldest full screen of information stored.
P — Display Previous Page
Moves the display to the previous screen of information stored.
N — Display Next Page
Moves the display to the next screen of information stored.